Annie Sloan Clear Wax is one of Annie Sloan’s most popular products. It can be used to give furniture a protective finish, to seal and protect painted surfaces or to change the sheen of a surface.
How To Apply Annie Sloan Clear Wax
There is no one definitive way to apply Annie Sloan Clear Wax. Some people use a brush, some people use a cloth, and others use their fingers. The important thing is to make sure the wax is evenly applied and that you don’t leave any streaks.
-annie sloan clear wax -soft cloth -brush
- Allow the wax to dry completely (usually takes about 15 minutes
- Start by cleaning the surface with a clean cloth and warm water
- Dry the surface completely
- Apply clear wax in a thin coat with a brush or cloth
-always apply wax in the same direction to avoid streaks -wax should be applied thin and evenly for even coverage -apply a second coat after the first has dried completely -allow the wax to dry completely before buffing to a shine
Frequently Asked Questions
How Long Do You Leave Annie Sloan Wax On Before Buffing?
The general rule of thumb is to leave the wax on for 3-5 minutes before buffing. However, you may need to experiment a bit to see what works best for you.
When Should You Buff Wax?
Buff wax when the paint is dry to a haze.
Do You Have To Use A Brush To Apply Annie Sloan Wax?
No, you don’t have to use a brush. You can use a rag to apply Annie Sloan wax.
To Summarize
To apply Annie Sloan clear wax, start by brushing it on to the surface in a thin layer. Then, use a clean cloth to buff it into the surface. Repeat this process until the surface is completely covered and shiny.
