If your Kenmore washing machine is not draining properly, or if you are seeing water standing in the tub after the wash cycle has completed, then you may need to clean the filter. The filter is located on the top of the washing machine and is easy to remove and clean.
How To Clean Kenmore Washing Machine Filter Top Loader
A Kenmore washing machine filter top loader should be cleaned every month to keep it running smoothly. First, remove the filter and empty any debris into the trash. Next, soak the filter in hot water and dish detergent for 10 minutes. Rinse off the filter and reinstall it.
-Kenmore washing machine filter top loader -Washing machine cleaner -Water – bucket – Rubber gloves – Protective eyewear
- Locate the filter at the top of the machine
- Check for any debris or blockages and remove if necessary replace the
- Open the lid of the washing machine
- Remove the filter and rinse it with water
below – Kenmore washing machines come with a filter on the top that should be cleaned regularly to ensure proper machine function. – The filter can be easily accessed and cleaned by following these simple steps: – Remove the filter cover by unscrewing it counterclockwise. – Remove the filter by pulling it straight up. – Rinse the filter under running water. – Shake off any excess water and replace the filter in the reverse order of removal. – Screw the
Frequently Asked Questions
How Do I Clean My Kenmore Top Load Washer?
To clean your Kenmore top load washer, you will need to fill it with hot water and a liquid laundry detergent. Add 1/2 cup of chlorine bleach if the washer is white or light colored. Set the machine to the hottest water and largest load size setting. Run the washer on a normal cycle.
Do Top Load Washers Have Filters?
It depends on the model. Some top load washers have filters and some don’t.
How Do I Clean The Filter On My Top Load Washing Machine?
To clean the filter on your top load washing machine, remove the lid and look for a small door on the front or back of the machine. Open the door and pull out the filter. Clean any debris from the filter and re-insert it. Close the door and replace the lid.
In Closing
To clean the filter on a Kenmore top loader washing machine, first remove the filter cover. Next, use a garden hose to spray water into the filter. Finally, replace the filter cover and run the washing machine.
