How To Clean Intellichlor Salt Cell

Intellichlor salt cells are one of the most important features of an in-ground chlorination system. These cells use a special blend of minerals to create chlorine gas that is then used to sanitize your pool water. It is important to keep your Intellichlor salt cell clean and free of debris in order to ensure optimal performance.

How To Clean Intellichlor Salt Cell

The IntelliChlor Salt Cell should be cleaned every 3 months. To clean the cell: 1) Turn off power to the pool equipment. 2) Remove the cell from the equipment. 3) Soak the cell in a solution of diluted muriatic acid for 30 minutes. 4) Rinse the cell with clear water. 5) Reinstall the cell in the equipment. 6) Turn on power to the pool equipment

1. intellichlor salt cell 2. vinegar 3. baking soda 4. water 5. bucket or container 6. scrub brush

  • Dissolve 1 cup of baking soda in the fresh water dunk the cell in the baking soda solution and let it soak for 30 minutes
  • Remove cell from chlorine generator
  • Fill a clean bucket with fresh water

below IntelliChlor Salt Cells must be cleaned every 6 to 12 months, depending on the amount of use. To clean the IntelliChlor Salt Cell: 1. Turn off all power to the IntelliChlor Salt Cell. 2. Disconnect the cell from the power supply. 3. Remove the cell from the pool system. 4. Rinse off any visible dirt or debris with fresh water. 5. Soak the cell in a 10


Frequently Asked Questions

What Do You Clean A Salt Cell With?

A salt cell is a device that uses electricity to convert salt water into chlorine gas and sodium hydroxide. It can be cleaned with a vinegar and water solution.

When Should I Clean My Intellichlor Salt Cell?

To clean the IntelliChlor salt cell, you should remove it from the pool and soak it in a muriatic acid bath.

How Do You Make Salt Cell Cleaner?

Salt cell cleaners are used to clean the cells of salt water pools. The most common type of salt cell cleaner is an acid based cleaner. The acid dissolves the calcium and magnesium build up on the cells.


In The End

Salt cells need to be cleaned regularly in order to maintain optimal performance. The cell can be cleaned with a garden hose by spraying it down and then flushing it with fresh water.

Leave a Comment

Your email address will not be published. Required fields are marked *