Vertical smokers are a great choice if you have limited space or want to smoke a large amount of meat. The Pit Boss 700 Series is a vertical smoker that has an auger to move the wood and charcoal around, making it easy to get good heat and smoke coverage. Over time, the auger can become dirty and need to be cleaned.
How To Clean Auger On Pit Boss Vertical Smoker
The auger on a pit boss vertical smoker can be cleaned by first removing the screws that hold the cover in place. The cover can then be removed to reveal the auger. The auger can be cleaned by using a brush or a vacuum cleaner to remove any debris that may have accumulated. The screws can then be replaced and the cover can be put back in place.
-a brush -soap -water
- Locate the auger on the bottom of the smoker and remove the four screws that hold it in place
- Clean the auger with a wire brush and then re
- Remove the cooking grates and ash catcher from the smoker
below -Remove the cooking grates and wood chip tray from the smoker -Locate the auger on the bottom of the smoker-Using a Phillips head screwdriver, remove the two screws that hold the auger in place-Gently pull the auger out of the smoker and detach the fan blade-Wipe down the auger with a damp cloth-Reattach the fan blade to the auger and reinsert into smoker-Secure screws to hold auger in place
Frequently Asked Questions
How Do I Clean My Pellet Grill Auger?
The easiest way to clean your pellet grill auger is by using a can of compressed air. Simply spray the compressed air into the auger and dislodge any leftover debris. You can also use a small brush to clean out any debris that may be stuck in the crevices of the auger.
How Do You Clean The Auger On A Pellet Grill?
If the auger on your pellet grill is dirty, you can clean it with a wire brush.
How Do You Unclog An Auger On A Z Grill?
To unclog an auger on a Z grill, use a metal coat hanger to clear the blockage.
Wrap-Up
The Pit Boss vertical smoker is easy to clean. The auger can be cleaned with a brush and the cooking grates can be cleaned with a wire brush. The ash catcher can be emptied and the water pan can be cleaned with soap and water.
